Top rated Products
$ 16.00
- DEWALT drill bit set has connectable accessory storage system to optimize storage space
- Patented bit-bar design of the drill bits set allows easy removal of bits and customizable placement
- Clear lid of the titanium drill bit set allows you to easily see contents at glance
- Clip latch for secure closing
- Small Bulk Storage size fits inside the Small and Medium ToughCase plus (sold separately) - Ideal for organizing loose bits
- Patented web taper increases the rigidity of the bit to decrease potential for bit breakage
- Proprietary Pilot point tip delivers speed and clear, burr-free holes which help reduce bit walking
- Ideal for metal, wood, and plastic
$ 17.60
- The right angle drill adaptor features Rapid Load(TM) head for easy bit changes
- 90 degree head and flexible shaft of the right angle drill attachment reaches tight spaces
- DEWALT right angle attachment has 10 times magnetic holding power on average vs. DW2505 using #8 truss-head screw
$ 118.40
- DCD771 in cordless drill combo kit features 2 speed transmission (0-450 / 0-1500 RPM)
- DCD771 high performance motor of cordless tools combo kit delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
- DCD771 compact, lightweight design of the drill/ impact driver combo kit fits into tight areas
- DCD771 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
- DCD771 Ergonomic handle delivers comfort and control
- DCF885 Compact (5.55-inch front to back), lightweight (2.8 lbs) design fits into tight areas
- DCF885 1-handed loading 1/4-inch hex chuck accepts 1-inch bit tips
- DCF885 features 3 LED light ring withe 20 second delay to provide visibility without shadows
$ 15.98
- A great accessory for all your drilling tasks
- Easily change from fastening to drilling with 1/4-inch hex quick connect
- Conveniently tighten with one hand with the exclusive single sleeve design
- Constructed with all metal for supreme durability
$ 48.99
- Premium XR Lithium Ion pack of DEWALT 20V battery provides up to 33% more capacity than standard 20V MAX* battery packs
- 3-LED fuel gauge system of DEWALT battery allows immediate feedback on state of charge
- No memory and virtually no self-discharge for maximum productivity and less downtime
- Weighs 1.42 lbs allowing user maximum run-time in a lightweight battery
- Premium XR Lithium Ion pack provides up to 33 percent more capacity than standard 20V MAX battery packs
- 3-LED fuel gauge system allows immediate feedback on state of charge
- No memory and virtually no self-discharge for maximum productivity and less downtime
$ 64.00
- 2–14 Newton meter range (18–124 Inch Pounds) - Length: 22.9cm (9")
- Adjustable in 0.4 Nm increments - Ratcheting 3/8" drive
- Reads and registers for both left hand and right hand threading
- Dial-adjust system allows desired torque setting to be preset
- Conversion scale on tool body - Calibrated to be accurate to +/- 4%
$ 96.00
- Efficient Brushless motor uses an innovative axial fan design that maximizes on air output and run time
- Up to 410 CFM of air volume at 120 mph to clear heavy debris
- Slim design, low weight and ergonomic design gives a comfortable work experience
- Cruise control allows user to easily set the blower at the optimum RPM for each specific task.
- Low noise levels enable longer working hours and the possibility to work in noise sensitive and restricted areas and comes with a 2-year Warranty
$ 160.00
- X-TORQ ENGINE: The X-Torq engine design reduces harmful exhaust emissions by up to 60% and increases fuel efficiency by up to 20%
- ERGONOMIC HANDLE: the handle can be adjusted to fit the operator and has rubber inserts for a comfortable grip.
- COMFORTABLE HARNESS: Padded harness is shaped to fit the contours of the operator.
- CRUISE CONTROL: Variable speed throttle with cruise control can be set for easier handling
- AIR PURGE: Removes air from carburetor and fuel system for easy starting
$ 4.00
- INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors
- VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines
- PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
- MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA
$ 39.16
- 2-in-1 SpeedFit connector accepts all hex shank accessories plus 1" screw driver bits
- Titanium coating increases drilling speeds and extends drill bit life
- Precision and 135° split point penetrates on contact preventing drill bit "walking"
- Compact screw guide prevents fastener wobble or disengaging from the bit while driving screws
- ¼" SpeedFit hex shank stops drill chuck spin-out
$ 120.00
- Kobalt 24-volt max cordless combo kit includes 1/2-in drill/driver, 1/4-in impact driver, 24-volt max high-capacity Li-ion battery and charger
- 1/4-in impact driver features a brushless motor that delivers up to 1,800-in-lbs of torque, and electronic speed control with 3 speed settings (0-850, 0-2,000 and 0-2,700 RPM)
- 1/2- in drill/driver features a long-lasting brushless motor that delivers up to 650-in-lbs of torque, 2-speed gearbox, variable-speed trigger and a keyless all-metal chuck
- 1/4-in quick-release collet allows for fast bit changes
- Built-in LEDs on both tools illuminate your work space and increase accuracy
- 24-volt max 2.0-Ah Li-ion battery provides 50% more power and 3.6 times more runtime than Kobalt 18-volt tools
$ 153.60
- CORROSION RESISTANCE: Socket sets have full polish chrome finish
- INCREASED ACCESS AND MINIMAL ARC SWING: 72-tooth ratchets in 3 drive sizes come with socket set metric and standard
- INCREASED TORQUE: 6-point sockets set with fastener
- EASY TOOL STORAGE: Durable Blow Molded Case
$ 43.96
- REDLINK Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger
- Fuel gauge onboard: Displays remaining runtime for less downtime on the job
- M18 red Lithium 5.0Ah Bat pack
- The product is easy to use and easy to handle
- The product is highly durable
- Versatility: Powers more than 60 Milwaukee M18 cordless power tools
- Offers long-lasting performance and durability
$ 7.20
- Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
- Xtreme torsion technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
- 2 piece design is engineered to allow the torsion technology to fully activate
- High quality steel engineered for use with impact drivers
- Designed exclusively for high torque impact drivers
$ 55.99
- The EN-EL15c is a Rechargeable Lithium-ion battery for use with select Nikon cameras.
- Compatible With Nikon Models: Z 7II, Z 6II, Z 5, Z 7, Z 6, D780, D850, MB-N11 Power Battery Pack
- Compatible with MH-25a Battery Charger
- This battery can be charged with the EH-7P charging AC adapter, when used with Nikon cameras that have the capability to charge batteries in-camera.
$ 27.62
- 26-Piece screwdriver bit set
- Durable steel construction
- Suitable for use in high torque applications
- Each of the bits features a forged tip, ensuring maximum grip and superior control. Since the sockets utilize a thin wall construction and radius corners, they drive on flats to reduce stripping and breakage.
$ 23.96
- All metal high torque ratchet delivers more durability and 2X driving speed
- Revolver style bit storage and selection
- 3 1/2" Power Groove Bits for power tool compatibility
- Chrome Plated Bits - Marine Grade Rust Protection
- Magnetic bit retention delivers consistent driving performance
$ 31.98
- 6-Piece Cushion Grip Screwdriver Set provides you with professional grade solutions and durability. The professional screwdriver set features an anti-peel handle design, hardened tips, and forged shanks.
- Tactile identification, a new-to-world Milwaukee innovation, allows you to accurately select the correct driver without looking. The wrench-ready bolster and precision knurling offers you the features needed to increase your efficiency and effectiveness on the job site.